Czech Republic (Příbram)

Replacement seals for Ravak showers

Czech bathroom-products manufacturer based in Příbram, founded in 1991. Sold widely across Central and Eastern Europe, plus growing presence in Germany, France and Spain. Known for the Pivot (corner pivot door) and Chrome (recess hinged door) ranges.

Configurator: find universal set Ravak on Amazon

Ravak replacement strategy

Ravak Pivot is a corner-entry pivot door with two leaves — magnetic 135° is required between segments. Ravak Chrome is a single hinged door for recess installations — magnetic 180° fits. Most Ravak doors run on 6 mm glass; recent premium ranges go to 8 mm. Universal profiles matched to the glass thickness fit straight away. For very recent ranges, original parts are available via ravak.com with 1–2 week lead times.

Ravak models & matching replacement seals

Find your model in the list — we recommend universal seals matched to your glass thickness and door type, and add them directly to your Amazon cart on request.

Ravak Pivot

PDOP2 pivot door for corner entry

Type: Corner entry
Glass: 6 mm
Height: 1900 mm

Magnetic seal × 1 — Door closing seal — the magnet holds the door snugly against the fixed panel.

Floor seal × 1 — Closes the gap between the glass and the tray / floor.

Corner seal × 1 — Seals the vertical glass-to-glass corner.

Set price

52,70 €

Set on Amazon

Ravak Chrome

CSD2 pivot door for niche

Type: Pivot door
Glass: 6 mm
Height: 1950 mm

Magnetic seal × 1 — Door closing seal — the magnet holds the door snugly against the fixed panel.

Floor seal × 1 — Closes the gap between the glass and the tray / floor.

Abutment profile × 1 — Vertical seal against the masonry wall.

Set price

60,70 €

Set on Amazon

Ravak Blix

BLDP4 sliding door, 4-part

Type: Sliding door
Glass: 6 mm
Height: 1900 mm

Lip seal × 1 — Closing seal for sliding doors — presses gently against the fixed panel.

Water deflector × 1 — Directs water on the floor back into the shower area.

Set price

20,80 €

Set on Amazon

Ravak 10° (Ten Grad)

Walk-In 110 cm

Type: Walk-In
Glass: 8 mm
Height: 2000 mm

Water deflector × 1 — Directs water on the floor back into the shower area.

Abutment profile × 1 — Vertical seal against the masonry wall.

Set price

26,80 €

Set on Amazon

Complete shower bestsellers — alternative to seal replacement

If your shower is older than 15 years, the frame is rusting or you are renovating anyway, a complete new shower often pays off more than replacing the seals. Here are the bestsellers on Amazon — matched to the Ravak construction types you see above.

🔥 BestsellerAlpenberger

Alpenberger Eckeinstieg-Komplettdusche 100×100 cm

Corner shower cabin with 2 pivot doors + 2 side panels, 6 mm tempered glass. Includes lift-and-lower mechanism.

Dimensions: 1000 × 1000 mm
Glass: 6 mm ESG

Check current price & rating on Amazon

View on Amazon

Affiliate link — we earn from qualifying purchases.

🔥 BestsellerAlpenberger

Alpenberger Eckdusche 100×80 cm mit Drehtür + Seitenteil

Classic corner entry for narrow bathrooms — one pivot door plus one side panel. 6 mm tempered glass.

Dimensions: 1000 × 800 mm
Glass: 6 mm ESG

Check current price & rating on Amazon

View on Amazon

Affiliate link — we earn from qualifying purchases.

🔥 BestsellerHeilmetz

Heilmetz Nischen-Drehtür 90×195 cm

Pivot/swing door for niches, 6 mm tempered glass with coating on both sides. A very popular bestselling door.

Dimensions: 900 × 1950 mm
Glass: 6 mm ESG

Check current price & rating on Amazon

View on Amazon

Affiliate link — we earn from qualifying purchases.

🔥 BestsellerAQUABATOS

AQUABATOS Nischen-Drehtür 90×187 cm

Frameless niche pivot door, 5 mm tempered glass. Very good ratings (4.9★) at a low price.

Dimensions: 900 × 1870 mm
Glass: 6 mm ESG

Check current price & rating on Amazon

View on Amazon

Affiliate link — we earn from qualifying purchases.

How to find the right replacement seal

Measure the glass thickness: with a calliper or ruler at the glass edge. Common thicknesses: 5, 6, 8, 10 mm.
Identify the door type: hinged, sliding, folding or walk-in without door?
Locate the wear point: magnetic seal at the closing edge, floor seal at the lower edge, corner seal in the vertical corner.
Original vs. universal: originals from the manufacturer are usually more expensive but fit 100 %. Universal profiles fit in most cases on Ravak without issues.

Frequently asked questions about Ravak

Ravak Pivot or Chrome — what's the difference?

Pivot = pivot door with two leaves (corner entry). Chrome = hinged door for recess installations. For Pivot, magnetic 135°; for Chrome, magnetic 180°.

What glass thickness do Ravak doors use?

Most Ravak doors run on 6 mm glass; recent premium ranges (Brilliant, SmartLine) use 8 mm. Always measure with a calliper before ordering replacement seals — Ravak uses tight tolerances.

Are Ravak universal profiles compatible?

Yes, in most cases. Ravak uses internationally standard click-profile geometries — universal magnetic seals, lip seals and floor seals fit straight away. Only for the bottom rail of older Ravak Chrome models (pre-2010), measuring the profile cross-section before ordering is recommended.

Where can I order original Ravak spare parts?

Original parts for current ranges via ravak.com or specialist retailers, with 1–2 week lead times. For older or discontinued ranges, universal profiles matched to the glass thickness are the practical solution — most fit without adjustment.